Response Surface Optimized Removal of Reactive Red HE3b from an Aqueous Solution using Pyrolytically Biochar Derive from Euclea Divinorum Waste Biomass

  • Mark P Odero Africa Centre of Excellence in Phytochemicals, Textile and renewable Energy (ACE-PTRE II), Moi University and Rift-Valley Technical Training Institute
  • Scolastica Manyim Africa Centre of Excellence in Phytochemicals, Textile and renewable Energy (ACE-PTRE II) and Moi University
  • Timothy Omara Africa Centre of Excellence in Phytochemicals, Textile and renewable Energy (ACE-PTRE II) and Moi University
Keywords: Adsorbents, remediation, response surface, azo dyes, central composite

Abstract

One of the major environmental concerns in the 21st century textile industries, is the removal of waste dyes from textile effluents due to the fact that they have been scientifically proven to be harmful, persistent and allergy inducing. Where-as most modern remediation techniques are expensive and selective making them out of reach for most third world nations, the use of agricultural wastes as alternative low-cost adsorbents has been on the rise majorly because of their availability, ease of preparation and non-selectivity where one set of adsorbent can be used for the remediation of several dyes. Biochar and activated carbon derived from these wastes are the most common forms of adsorbents from agricultural wastes because they are efficient, cheap and easy to make. In this study, wastes from the extraction process of the natural dyeing plant Euclea divinorum, were developed into pyrolytically derived biochar at 400 ℃ and subsequently used for the effective removal of the synthetic azo dye, reactive red HE3b. A 24 central composite response surface method was developed and used to examine the effects of adsorbent dosage, contact time, initial concentration and agitation speed on the adsorption of the dye in the process giving the optimum adsorption conditions. The optimum conditions from the study, were an adsorbent dosage of 0.05g, temperature 45℃, an initial concentration of 1.0 ppm and an agitation speed of 300 rpm. These, gave a percentage removal of 84.71% predicted against 84.89 % experimental, signifying the accuracy of the model and the potential adsorptive properties of the biochar. This study therefore, provided for a cheap and available alternative adsorbent for the removal of reactive red HE3b.

Article Views and Downloands Counter


Download data is not yet available.

References

Ali, I., Asim, M., & Khan, T. A. (2012). Low cost adsorbents for the removal of organic pollutants from wastewater. Journal of Environmental Management, 113, 170–183. https://doi.org/10.1016/j.jenvman.2012.08.028

Almeida, M., Erthal, R., Padua, E., Silveira, L., & Am, L. (2008). Talanta Response surface methodology ( RSM ) as a tool for optimization in analytical chemistry. 76, 965–977. https://doi.org/10.1016/j.talanta.2008.05.019

Carmen, Z., & Daniela, S. (2012). Textile organic dyes - Characteristics, polluting effects and separation/elimination procedures from industrial iffluents - A critical overview. https://www.intechopen.com/chapters/29369, DOI: 10.5772/32373

Çelekli, A., Yavuzatmaca, M., & Bozkurt, H. (2009). Kinetic and equilibrium studies on the adsorption of reactive red 120 from aqueous solution on Spirogyra majuscula. Chemical Engineering Journal, 152(1), 139–145. https://doi.org/10.1016/j.cej.2009.04.016

Gürses, A., Güneş, K., & Şahin, E. (2021). Removal of dyes and pigments from industrial effluents. In Green Chemistry and Water Remediation: Research and Applications. https://doi.org/10.1016/b978-0-12-817742-6.00005-0

Hasan, R., & Setiabudi, H. D. (2018). Science Removal of Pb ( II ) from aqueous solution using KCC-1 : Optimization by response surface methodology ( RSM ). Journal of King Saud University - Science, 1–7. https://doi.org/10.1016/j.jksus .2018.10.005

Kim, Y., Kim, J., Moon, D. H., & Shin, H. (2018). Adsorption and precipitation of anionic dye Reactive Red 120 from aqueous solution by aminopropyl functionalized magnesium phyllosilicate. Korean Journal of Chemical Engineering, Volume 36, pages101–10835(3),1–8. https://doi.org/10.1007/s11814-018-0168-8

Manyim, S., Kiprop, A. K., Mwasiagi, J. I., Achisa, C. M., & Odero, M.P. (2021). Dyeing of cotton fabric with Euclea Divinorum extract using response surface optimization method method. https://doi.org/10.1108/RJTA-10-2020-0115

Odero, M. P., Kiprop, A. K., K’Owino, I. O., Arimi, M., & Manyim, S. (2020). Evaluation of dyeing properties of natural dyes extracted from the heartwood of Prosopis juli fl ora on cotton fabric. Research Journal of Textile and Appare. https://doi.org/10.1108/RJTA-06-2020-0058

Song, Y., Wang, F., Bian, Y., Orori, F., Jia, M., & Xie, Z. (2012). Bioavailability assessment of hexachlorobenzene in soil as affected by wheat straw biochar. Journal of Hazardous Materials, 217–218, 391–397. https://doi.org/10.1016/j.jhazmat.2012.03.055

Tejada-tovar, C., Villabona, Á., & Cabarcas, A. (2018). Optimization of Variables in Fixed-Bed Column Using the Response Surface Methodology. 11(23), 1121–1133. HIKARI Ltd, www.m-hikari.com https://doi.org/10.12988/ces.2018.83101
Published
2022-02-04
How to Cite
Odero, M., Manyim, S., & Omara, T. (2022). Response Surface Optimized Removal of Reactive Red HE3b from an Aqueous Solution using Pyrolytically Biochar Derive from Euclea Divinorum Waste Biomass. Africa Journal of Technical and Vocational Education and Training, 7(1), 190-197. Retrieved from https://afritvetjournal.org/index.php/Afritvet/article/view/151